Light and crisp characteristics yield a quick response, high performance rig which makes the Wavescape the perfect
choice for explosive down-the-line moves. With all new shorter boom lengths for 2018, the Wavescape 4-batten layout
makes for light, powerful, and compact handling. And with total xply construction; 4mil biax window sections with our
exclusive 3.5 biax body panels, you can be confident that your wavescape will survive anything you put it in!
When water goes vertical, the Wavescape is the ultimate mobility and expression tool for your own style.
Features & Benefits
Exclusive 3.5 mil Biax body panels – reliability in the rinse cycle and UV longevity.
4 mil Biax window panels – durable visibility
Unique, super durable full IYU250 4-part mast-pocket construction – the perfect material between your mast and the elements.
RDM recommended. SDM compatible – both mast types fully compatible to maximize your windsurfing experience
Triple foot and triple reinforced luff construction – maximized longevity
5 mil Triax-laminate luff and foot panels – profile stability in radical conditions.
Higher aspect ratio and modified foot batten position for improved dynamic handling.
Forward-profile batten systems with Standing Battens at specific locations – responsive, low-end drive and easy upper end handling
Dual clew eyelets with webbings – adjust leech-release character to suit your sailing conditions
Click to reveal features.
By Monty Spindler
“When waves approach Tarifa the stoke is amplified with the light, responsive Wavescape.”
Frequently asked questions?
Find the answers of your Wavescape 2018 questions Just click the box below.
I can see minor colour inconsistancy in the coloured monofilm material, is this a quality problem?
Loftsails using high quality Dimension Polyant films considered as a leading film manufacturer. The BI-PLY colored monofilm are two films laminated together. During production there is a large temperature difference between the two films at the lamination point. This causes the top film (film with color adhesive) to slightly shrink and the bottom film does not shrink at the same rate. This can cause "a slight minimal wave or impression" in the fabric. There is no concern on laminate quality.
What does 1 Year Unconditional + 1 Year Conditional warranty cover?
Warranty is valid 2 years after date of purchase. When making a warranty claim in the first year the product is unconditionally warranted. When making a warranty claim in the 2nd year the product must have clearly suffered from a manufacturer error.
When unrolling my sail some battens are looking pre-curved?
All windsurfing sails with battens experience batten bending when rolling for transport. The battens will bend because of the curves cut into the sail to produce profile. Loftsails are rolled right side up, this flexes the battens as if the sail is on starboard tack. Battens are made from polyester, carbon and resin. They remember their being curved, which gives the sail a pre-disposition to be on starboard tack. This results in the sail having a preference to be on starboard tack. This asymmetric character is normally not an issue. Rolling the sail port side up will tend to bend the battens in the opposite direction which can minimize this asymmetric character.
Why are there small wrinkels visible in the footpanel of my sail?
Monty comments: Wrinkles in the foot panel are common to my designs! There is always alot of profile worked into the bottom of the vertical seam, I have tried to remove the wrinkles from the lower panel but this results in flatter shapes that do improve performance. Many of our sails do not show such foot panel wrinkles, however unfortunately one could say they are typical of my designs.
Didn't find the answers you need on the site?
Just fill out the form and we come back to you.